Safe Step Poured-In-Place Roof Walkpad
Fully Adhered Roof Walkpad Protection
A high-visibility, poured-in-place walkpad that bonds directly to the roof surface, creates obvious service paths, and protects high-traffic areas without the limitations of roll material.
FULLY ADHERED. NO BLOW-OFF RISK. FULLY DESIGNABLE.
Why Contractors Like It
SafeStep gives you the visibility and protection of a walkpad with the bond, flexibility, and cleaner roof interface of a poured-in-place system.
Fully Adhered
Bonds directly to the prepared roof surface instead of sitting on top like a separate roll.
No Blow-Off Risk
No loose edges for wind to catch, lift, curl, or blow off the roof.
Cleaner Roof Interface
No underside cavity for rocks, dirt, or organic matter to migrate under the pad.
Fully Designable
Create strips, pads, lanes, islands, arrows, or custom routes around actual rooftop equipment.
Application Snapshot
Applied at 50 mils wet. Material rises to approximately 100 mils as it cures and develops a fine textured walk surface. Use around HVAC / RTU zones, roof hatches, ladders, service routes, drains, and other high-traffic maintenance areas.
Designed to improve visibility and traction in service areas. Slip resistance depends on surface conditions, water, frost, debris, slope, and jobsite safety practices.
50 mils wet
~100 mils cured
Textured cured finish
High-visibility yellow
Traction-ready surface
The Pitch in Plain English
SafeStep gives you the visibility and protection of a walkpad with the bond, flexibility, and cleaner roof interface of a poured-in-place system.
Fully Adhered to the Roof
Because the material is poured in place, it bonds directly to the prepared roof surface. That means no separate pad sitting on top waiting to shift.
No Blow-Off Liability
There are no loose roll edges for wind to grab. Once cured, the pad stays where it belongs instead of flapping, curling, or migrating.
Cleaner Roof Interface
With proper installation there is no hidden underside cavity collecting rocks, grit, leaves, or organic debris that can abrade the roof over time.
Tell Crews Where to Walk. Protect the Roof Where They Actually Do.
SafeStep helps define service areas and protect the roof where maintenance crews actually walk. Talk with the PolyArmor team about adding a fully adhered walkpad system to your roof.
Filled and Packaged for Volume Orders
SafeStep is filled and packaged on the same production line built to support high-volume contractor and distributor orders, palletized and ready to ship.
